P00121_-_HP_Smart_Array_Profile

36 Version 1.3.001
Value
Notes
1342177280
160 MBytes/sec
2684354560
320 MBytes/sec
Possible Serial Values are
Table 16 - HP Smart Array profile: HPSA_DiskDrive.NegotiatedSpeed Serial
Value
Notes
0
Unknown
1500000000
1.5 GBits/sec
3000000000
3 GBits/sec
6000000000
6 GBits/sec
7.3.4 HPSA_DiskDrive.NegotiatedDataWidth
Indicates the current width of the bus. Supported values are
Table 17 - HP Smart Array profile: HPSA_DiskDrive.NegotiatedDataWidth
Value
ValueMap
0
Unknown
1
SAS/SATA serial
8
Narrow
16
Wide
7.3.5 HPSA_DiskDrive.Identify(uint32 Duration)
This method will cause the hard drive to set some indicator (e.g. set or blink drive LEDs) for the given
duration (default duration is 30 seconds). After the duration has expired the drive indicator will return to
normal use.
Return values for Identify() method shall be the same as specified in Table 12 where the method
execution behavior matches the return code description.
Identify() parameters shall be the same as those specified in Table 13.
7.3.6 HPSA_DiskDrive.DriveConfiguration
Indicates the how the drive has been configured by the controller. Supported values are:
Table 18 - HP Smart Array profile: HPSA_DiskDrive.DriveConfiguration
Value
ValueMap
0
Unknown
1
Unconfigured
2
Data
3
Spare
4
Non RAID
7.3.7 HPSA_ DiskDrive.DriveRotationalSpeed
Value indicates the rotational speed of the drive in revolutions per minute.
7.3.8 HPSA_DiskDrive.DriveHasMNPData
Boolean value indicates that the drive supports reporting of Monitoring and Performance data counters.