P00121_-_HP_Smart_Array_Profile

Version 1.3.001 37
7.3.9 HPSA_DiskDrive.DrivePlacement
Value indicates where the drive is located with respect to the controller.
Table 19 - HP Smart Array profile: HPSA_DiskDrive.DrivePlacement
Value
ValueMap
0
Unknown
1
Internal
2
External
7.3.10 HPSA_DiskDrive.ControllerLocation
This value indicates the location of the controller with which the disk drive is attached to.
7.3.11 HPSA_DiskDrive.OperationalStatus.
This value indicates the Operational Status of the disk drive. Operationalstatus[0] depicts the Primary
operational status of the disk drive .
OperationalStatus[1] values shows the secondary(or extended) operational status of the disk drive.
The below values shows the possible OperationalStatus[1] values to account for the failure of a path from
controller to disk.
 If any path to the disk making up this volume is currently set to 5 (Path Error) and there still exists
at least one path that is active and the disk is currently ok then:
o OperationalStatus [0]: 3 (degraded)
o OperationalStatus[1]: 32771 (Physical Path In Error)
 If all paths on all disks are set to 5 (Path Error) then:
o OperationalStatus[0]: 6 (error)
o OperationalStatus[1]: 32771 (Physical Path In Error)
The below values shows the possible OperationalStatus[1] values related to secure erase operations.
Table 20 - HP Smart Array profile: HPSA_DiskDrive.OperationalStatus
Value
ValueMap
0x8000
Queued for Secure Erase
0x8001
Erase in Progress
0x8002
Erase Completed
7.4 HPSA_StorageVolume
The HPSA_StorageVolume class has been extended from CIM_StorageVolume class as defined in SNIA
Block Services profile.
7.4.1 HPSA_StorageVolume.Deleteable
Boolean value indicates whether this logical volume can be deleted. In most configurations, only the
volume that is physically located at the end of the raid set can be deleted.
7.4.2 HPSA_StorageVolume.Accelerator
Value that indicates the status of the accelerator for this logical volume.
Supported values are as follows