P00121_-_HP_Smart_Array_Profile

Version 1.3.001 39
Value
ValueMap
OperationalStatus[0]
0x8009
Recovering
Degraded (3)
0x800A
Wrong Drive Replaced
Degraded (3)
Table 24 - HP Smart Array profile: HPSA_StorageVolume.OperationalStatus[1]
The below OperationalStatus[1] reflects the Secondary (OR) Extended status of the logical volume which
participate in the Secure Erase Operation.
Value
ValueMap
OperationalStatus[0]
0x800B
Erase in Progress
Degraded (3)
0x800C
Erase Completed
Degraded (3)
The below OperationalStatus[1] includes the statuses of all paths from an initiator port to a target port on
a disk. Current HPSA_StorageVolume provider will change to determine status of all paths associated
with storage extents that the volume is based on.
 If any path on any disk making up this volume is currently set to 5 (Path Error) and there still
exists at least one path that is active and the volume is currently ok then:
o OperationalStatus [0]: 3 (degraded)
o OperationalStatus[1]: 32781 (Physical Path In Error)
 If all paths on all disks are set to 5 (Path Error) then:
o OperationalStatus[0]: 6 (error)
o OperationalStatus[1]: 32781 (Physical Path In Error)
7.4.7 HPSA_StorageVolume. PhysicalDrvMultipathAccess
This is a new property that will be added to the definition of HPSA_StorageVolume. Definition will be:
Uint16 PhysicalDrvMultipathAccess.
Table 25 - HP Smart Array profile: HPSA_StorageVolume.PhysicalDrvMultipathAccess
Value
ValueMap
Description
1
not supported
Not supported by Array
Firmware
2
not configured
Supported by Array
Firmware but not
configured
3
configured redundant
Volume is configured with
redundant physical paths
on all physical drives that
make up the volume
4
configured non-redundant
Volume is configured with
redundant paths but is
currently not redundant
possibly due to failure of 1
or more paths or a
configuration error