P00121_-_HP_Smart_Array_Profile

42 Version 1.3.001
7.6.19 HPSA_MediaAccessStatData.RetryRecoveredReadErrors
Value indicates the number of Retry Recovered Read Errors as reported by MNP counters.
7.6.20 HPSA_MediaAccessStatData.RetryRecoveredWriteErrors
Value indicates the number of Retry Recovered Write Errors as reported by MNP counters.
7.6.21 HPSA_MediaAccessStatData.FailedReadRecovers
Value indicates the number of Failed Read Recovers as reported by MNP counters.
7.6.22 HPSA_MediaAccessStatData.FailedWriteRecovers
Value indicates the number of Failed Write Recovers as reported by MNP counters.
7.6.23 HPSA_MediaAccessStatData.ServiceHours
Value indicates the number of Service Hours as reported by MNP counters.
7.7 HPSA_TSASSCSIProtocolEndpoint
The HPSA_TSASSCSIProtocolEndpoint class has been extended from CIM_SCSIProtocolEndpoint as
defined in SNIA SAS Target ports profile. The following properties have been added to represent the
protocol (command set) associated to a target port.
7.7.1 HPSA_TSASSCSIProtocolEndpoint.ProtocolIFType
ProtocolIFType is an enumeration that is synchronized with the IANA ifType MIB. Note that if the
ProtocolIFType is set to 1 (Other), then the type information should be provided in the
OtherTypeDescription string property.
7.7.2 HPSA_TSASSCSIProtocolEndpoint.OtherTypeDescription
The type of protocol endpoint when the Type property of this class (or any of its subclasses) is set to 1
(Other).Value is set to the string „SCSI‟.
7.7.3 HPSA_TSASSCSIProtocolEndpoint.Role
Value is set to 3 for Target port.
7.7.4 HPSA_TSASSCSIProtocolEndpoint.Path
Value indicates whether the diskdrive port path is active or not.
Table 24 - HP Smart Array profile: HPSA_TSASSCSIProtocolEndpoint.Path
Value
ValueMap
0
Unknown
2
Active
3
Passive
5
Path Error
7.8 HPSA_TSASPort
The HPSA_TSASPort class has been extended from CIM_LogicalPort as defined in SNIA SAS Target
ports profile. The following properties have been added to represent a target port.