P00121_-_HP_Smart_Array_Profile

56 Version 1.3.001
9.7.2 Drive Failed – Data Rebuilding
HPSA_StorageExtent:001
OPStatus = “OK”
HPSA_StorageExtent:002
OPStatus = “OK”
HPSA_StorageExtent:003
OPStatus = “ERROR”
HPSA_StoragePool:1
Concrete Pool
ConcreteComponent
HPSA_StorageRedundancySet:A
MemberOfCollection
HPSA_StorageExtent:004
Spare
OPStatus = “OK”
ExtentStatus = “Rebuild”
IsSpare
HPSA_StorageVolume:100
OpStatus = “Degraded,
Recovering”
PercentComplete = “33”
AllocatedFromStoragePool
Spared
Figure 25 - HP Smart Array profile: Disk sparing – Drive failed - rebuilding
Figure 25 shows the instance diagram after one of the data drives has failed. OperationalStatus will show
“ERROR” for the failed drive. The OperationalStatus for the StorageVolume will show
OpStat[0]:“Degraded”, OpStat[1]:”Recovering”. The OperationalStatus for the Spare drive will show
OpStat[0]:“OK” and the ExtentStatus will show OpStat[1]:“Rebuild”. This signifies that data is being rebuilt
to the spare drive. The progress for the rebuild will be shown in HPSA_StorageVolume.PercentComplete.
The CIM_Spared association is used to associate the spare to the failed drive that it has replaced.