P00121_-_HP_Smart_Array_Profile

58 Version 1.3.001
9.7.4 Drive replaced – Data Rebuild
HPSA_StorageExtent:001
OPStatus = “OK”
HPSA_StorageExtent:002
OPStatus = “OK”
HPSA_StorageExtent:003
OPStatus = “OK”
ExtentStatus = “Rebuild”
HPSA_StoragePool:1
Concrete Pool
ConcreteComponent
HPSA_StorageRedundancySet:A
MemberOfCollection
HPSA_StorageExtent:004
Spare
OPStatus = “OK”
IsSpare
HPSA_StorageVolume:100
OpStatus = “Degraded,
Recovering”
PercentComplete = “88”
AllocatedFromStoragePool
Spared
Figure 27 - HP Smart Array profile: Drive Replaced – data rebuilding
Figure 27 shows the instance diagram for the case where the failed drive has been replaced with a
functional drive and the array controller has started to rebuild the data back to the original drive. This
resembles Figure 25. Note that the ExtentStatus (OpStat[1]) for the Spare Drive is “None” and the original
Data Drive shows ExtentStatus (OpStat[1]) of “Rebuild” indicating that the data is being rebuilt to the
original drive.
StorageVolume OperationalStatus shows “OpStat[0]:Degraded, OpStat[1]:Recovering” and the progress
is available in property PercentComplete.