8x00 family of Disk Arrays 3.00.00 Installation and Reference Guide (AA-RW7SJ-TE, March 2008)

NOTE:

The <installdir> referstothefolderwhichyouhaveselectedduring

the HP MPIO EVA DSM installation. The default installation directory is

%ProgramFiles

%\Hewlett-Packard\HP MPIO DSM\EVA DSM.

4. Follow the on-screen instructions.

5. Reboot the system for the new registry parameter to take effect.

IMPORTANT:

During the process of enabling or disabling of load balance in an MSCS environment (for a cluster with

more than two nodes), you may have a set of nodes using SCSI-3 persistent reservations along with

another set of nodes using SCSI-2 reservations. In such cases (as part of step 1 in the above sections),

HP recommends that you move the cluster resources to the set of nodes that has the majority reservation.

Recovering inaccessible disk devices

If there is a stray reservation on a disk device, the device be com es inaccessible to the host systems

connected to it. This is because the strong reservation type (persistent reservations) supports load

balancing i

nclusters.

You can use the persistent reservations clear utility that comes with the HP MPIO EVA DSM package

to remove the stray reservations. For more information on how to use this utility, see HP MPIO EVA

DSM persistent reservations clear utility.

HP MPIO Full Featured DSM for EVA4x00/6x00/ 8x00 family of Disk Arrays 3.0 0.00