HP MPIO Full Featured DSM for EVA4x00/6x00/8x00 family of Disk Arrays 3.00.00 Installation and Reference Guide (AA-RW7SJ-TE, March 2008)

hpdsm cleanup device=1
Device Name : HP HSV210
Device Serial No. : 600508B400101F6A000070001D950000
Cleanup the failed path information for this LUN (y/n)? y
Cleanup Succeeded. Verify by issuing "hpdsm devices" command.
Example:
hpdsm cleanup d
evice=all
Successful for all the devices. Verify by issuing "hpdsm devices" command.
hpdsm notify
Syntax: hpdsm
notify event=notification_event_number time=number_of_minutes
The hpdsm not
ify command defines user notifica tion of events. The time attribute defines the number
of minutes that will elapse from the time the event occurs until the user is notified. The maximum value
that can be entered is 35000 minutes.
NOTE:
Syntax: hpds
m notify event=notification_event_number
The above command will make the notification to wait indefinitely until the user terminates the wait
(eg: with Ctr
l-C).
Table 3 defines the selections for the notification command string.
Table 3 Notification strin gs
Notification string
Notification_ event_
number
Notifies th e user when DSM:
HPDSM_NEW_DEVICE
1
Detects a new device.
HPDSM_ADDITIONAL_PATH
2
Detects a redundant path to an existing
device.
HPDSM_MAX_PATH_REACHED
3
Determines that a device configuration
contains the maximum number of
supported paths.
HPDSM_LAST_PATH_FAILURE
4
Detects that the last path to the device
is removed.
HPDSM_PATH_FAILOVER
5
Detects an existing path to a device
has failed and an alternate path is
being used.
HPDSM_MAX_LUNS_REACHED
6
Determines that the configuration
contains the maximum number of
supported LUNs.
HPDSM_ALL_NOTIFICATIONS
7
Detects any event related to MPIO
framework and DSM occurs.
The above notifications are sent by the HP MPIO EVA DSM and MPIO framework to the CLI. The CLI
displays the event in the command window as shown in the following example.
HP MPIO Full Featured DSM for EVA4x00/6x00/ 8x00 family of Disk Arrays 3.0 0.00
31