HP MPIO Full Featured DSM for EVA4x00/6x00/8x00 family of Disk Arrays 3.00.00 Installation and Reference Guide (AA-RW7SJ-TE, March 2008)

Figure 2 MPIO Properties page with Discover Multi-Paths tab enabled
To enable
multipath support for the listed devices, select a D evice Hardware ID, and click Add.
All devices with this hardware ID are handled by a DSM (either a vendor-supplied DSM or MS DSM).
DSM Install
In the MPIO Properties page, click the DSM Install tab. This tab enables you to install a vendor-supplied
DSM.WhileinstallingaDSM,youmustspecifythedriverpath,theINFfile name, and the DSM
Hardware ID. Figure 3 shows the MPIO Properties page with the DSM Install tab enabled.
HP MPIO Full Featured DSM for EVA4x00/6x00/ 8x00 family of Disk Arrays 3.0 0.00
43