Installation and Reference Guide for HP MPIO Full Featured DSM for MSA1000/1500 (Active-Active) Disk Arrays 3.00.00 (AA-RW8AD-TE, March 2008)

Upgrading HP MPIO MSA DSM on cluster conﬁgurations

To upgrade HP MPIO MSA DSM from a previous version on each member of a cluster con ﬁguration,

complete the st

eps below:

NOTE:

In a cluster conﬁguration, HP MPIO MSA DSM must be upgraded on one node at a time for all the

nodes in the cluster.

1. Complete the pre-installation checklist (Table 2) and the pre-installation procedure.

2. Using Cluster Administr ator:

a. Move all cluster resources owned by the current node to another nod e in the cluster.

b. Pause the current cluster node.

c. Disable failback for all groups c ontaining resources managed by the current node.

3. Upgrade HP MPIO MSA DSM on the current node by following step 2–6 from the procedure

Upgrading HP MPIO MSA DSM on stand-alone systems.

4. Using Cluster Administrator , resume the current cluster node.

NOTE:

Repeat steps 2–4 for all nodes in the cluster.

5. Using Cluster Administrator:

a. Restore failback for all groups containing resources as needed.

b. Redistribute cluster resources as desired.

Migrating from Windows Server 2003 to Windows Ser ver

2008 with HP MPIO MSA DSM

To migrate from Windows Server 2003 to Windows Server 2008 with HP MPIO MSA DSM, complete

the steps b

elow:

1. Back up all user data.

2. Install or Upgrade to HP MPIO MSA DSM 3.00.00, see Chapter 1.

3. Upgrade t

oWindowsServer2008.

4. Double-

click the Batch ﬁle (dep ending on your operating system):

•ForWindowsserver2008x86:

<Target_Dir>\x86\Win2k8Upgrade.bat

•ForWind

ows Server 2008 IA64:

<<Target_Dir>\ia64\Win2k8Upgrade.bat

•ForWindowsServer2008x64:

<<Targe

t_Dir>\amd64\Win2k8Upgrade.bat

NOTE:

To upgrade from cluster conﬁguration in Windows Server 2003 to Windows Server 2008, see

ttp://support.microsoft.com/kb/935197.

Installing the HP MPIO Full Featured D evice Speciﬁc Module (DSM) for MSA1000/1500 (Active-Active)

Disk Arrays software