Installation and Reference Guide for HP MPIO Full Featured DSM for MSA1000/1500 (Active-Active) Disk Arrays 3.00.00 (AA-RW8AD-TE, March 2008)

Figure 1 MPIO Properties page with MPIO-ed Devices tab enabled
To manually add support for new devices, complete the following steps:
1. Click Add in the MPIO Properties page. The Add MPIO Suppor t pa ge displays.
2. Enter the Vendor ID and Product ID for the new devices. All devices with this D evice H ardware
ID are ha
ndled by a DSM (either a vendor-supplied DSM or MS DSM).
To manually disable support for a device, select a Device H ardware ID and click Remove.
Discover Multi-paths
In the MPIO Properties page, click the Discover Multi-Paths tab. This tab displays the Device Hardware
IDs of the devices that support multipathing, which are currently not managed but suppor ted by MPIO.
Figure 2 show s the MPIO Properties page with the Discover Multi-Paths tab enabled.
36
Managing MPIO devices using Microsoft-provided interfaces on Windows Server 2008