Installation and Reference Guide for HP MPIO Full Featured DSM for MSA1000/1500 (Active-Active) Disk Arrays 3.00.00 (AA-RW8AD-TE, March 2008)

Figure 2 MPIO Properties page with Discover Multi-Paths tab enabled
To enable
multipath support for the listed devices, select a D evice Hardware ID, and click Add.
All devices with this hardware ID are handled by a DSM (either a vendor-supplied DSM or MS DSM).
DSM Install
In the MPIO Properties page, click the DSM Install tab. This tab enables you to install a vendor-supplied
DSM.WhileinstallingaDSM,youmustspecifythedriverpath,theINFfile name, and the DSM
Hardware ID. Figure 3 shows the MPIO Properties page with the DSM Install tab enabled.
HP MPIO Full Featured DSM for MSA1000/1500 (Active-Active) Disk Arrays 3.00.00
37