HP MPIO Full Featured DSM for SAN Virtualization Services Platform 4.01.00 installation and reference guide (5697-0237, January 2010)

1. Make a copy of the update.iss file in the installation location with the name setup.iss.
2. Choose one of the following options:
• To upgrade the Microsoft MPIO Framework component along with the DSM component, use
the renamed default setup.iss file.
• To upgrade only the DSM component (when the Microsoft MPIO Framework already exists
on your system), edit the renamed default setup.iss file as follows:
a. In line 23, replace Component-count=2 with Component-count=1.
b. Remove line 24.
c. In line 25, replace Component-1=DSM with Component-0=DSM.
3. If you want to avoid the automatic reboot feature, edit the setup.iss file as follows:
a. In line 39, replace Result=6 with Result=1.
b. In line 40, replace BootOption=3 with BootOption=0.
Removing HP MPIO SVSP DSM
To remove HP MPIO SVSP DSM, complete the following steps:
1. Make a copy of the uninstall.iss file in the installation location with the name setup.iss.
2. If you want to avoid the automatic reboot feature, edit the renamed setup.iss file as follows:
a. In line 28, replace Result=6 with Result=1.
b. In line 29, replace BootOption=3 with BootOption=0.
Creating response files for silent mode operations
The installation kit contains the following response files (.iss files): new.iss, uninstall.iss
and update.iss that are used to install, remove, and upgrade the software. In addition to these,
you can create your own customized response files for operations such as modify or repair, by selecting
or deselecting the different combination of the components.
Customized response files can be created by running the setup.exe in the record mode on one of
the systems. This response file can then be used to perform the same silent mode operation across
multiple systems.
To create the response file, complete the following steps:
1. At the command prompt, type the following command: <CMD> setup.exe /r, where /r option
enables the record mode. This invokes the GUI installation in the record mode.
2. Select the responses in each screen and run through the installation. The response file is created
at the following location: %WINDDIR%\setup.iss, where, %WINDIR% is the Windows install-
ation directory.
NOTE:
When selecting the response on each screen, do not click BACK and modify the selection. In
such a case, the response file needs to be generated again. Use this setup.iss file to perform
the same silent mode operation on multiple systems across the same platform.
Installing the HP MPIO Full Featured DSM for SAN Virtualization Services Platform18