HP MPIO Full Featured DSM for SAN Virtualization Services Platform 4.01.00 installation and reference guide (5697-0237, January 2010)

NOTE:
You cannot change the load balance policy for the devices using SCSI-2 reservations in an MSCS
environment.
Example:
hpdsm set device=1 policy=rr
Device Name: HP HSV210
Device Serial No.:600508B400101F6A000070001D950000
Change Load Balance policy (y/n)? y
Load Balance policy changed. Verify by issuing “hpdsm devices” command.
Example:
hpdsm set device=all policy=rr
Successful for all the devices. Verify by issuing "hpdsm devices" command.
hpdsm set device path
Syntax: hpdsm set device=x path=y
The hpdsm set device path command changes the preferred path for device x, as shown in
the following example.
NOTE:
Use the hpdsm paths device command to view the available paths for the device.
hpdsm set device=1 path=1
Device Name:HP HSV210
Device Serial No.:600508B400101F6A000070001D950000
Controller Port No.:P8398DXAAQQ013
Change Load Balance policy (y/n)? y
Preferred Path changed. Verify by issuing "hpdsm paths device=<number>" command.
HP MPIO Full Featured DSM for SAN Virtualization Services Platform 4.01.00 installation and reference
guide 29