HP MPIO Full Featured DSM for SAN Virtualization Services Platform 4.01.00 installation and reference guide (5697-0237, January 2010)

B Multipathing driver event log messages
This appendix lists the event log messages for HP MPIO SVSP DSM drivers and provides a description
of each message. The error log messages are written in the SYSTEM log file.
This appendix describes the following event log messages:
MPIO.SYS event log messages
HP MPIO SVSP DSM event log messages
MPIO.SYS event log messages
Table 5 lists MPIO driver event log messages, an explanation of each message, and a description of
the data that accompanies the message.
Table 5 MPIO.SYS event log messages
Contents of the
data dump
DescriptionMessageEvent
ID
N/A
MPIO created a new pseudo-LUN (a new
disk physical device object).
Pseudo-LUNcreated.
1
The current num-
ber of paths to the
device
A new instance of an existing pseudo-LUN
device object is seen through a different
path.
Added device to pseudo-
LUN.
2
N/A
MPIO failed to create a new (or update an
existing) pseudo-LUN device object, even
though DSM_name claimed support for it.
There was an error creat-
ing a device claimed by
the DSM.
3
The Path ID of the
failed device
A pseudo-LUN handled a failover. This mes-
sage does not indicate whether the failover
was successful.
A fail-over on pseudo-LUN
occurred.
16
N/A
At least one path to a pseudo-LUN has
failed. This signals the end of failover hand-
ling for the pseudo-LUN and that the device
is now operating with at least one less path.
Pseudo-LUN is currently
in a degraded state. One
or more paths have
failed, though the pro-
cess is now complete.
17
The Path ID of the
failing device
A pseudo-LUN has just one path, and DSM
has requested a failover.
A Single Path Fail-Over
is being attempted on
pseudo-LUN.
18
The Path ID of the
failing device
Resource allocation failed during an attemp-
ted failover, and failover is not currently
active.
An operation failed on
devicedue to lack of
memory.
19
HP MPIO Full Featured DSM for SAN Virtualization Services Platform 4.01.00 installation and reference
guide 37