HP MPIO Full Featured DSM for SAN Virtualization Services Platform 4.01.00 installation and reference guide (5697-0237, January 2010)

Contents of the
data dump
DescriptionMessageEvent
ID
DSM ID of the
failed attempt
An MPIO call to DSM’s RemoveDevice oper-
ation failed.
A device under pseudo-
LUN, being controlled by
DSM_name was removed, but
the DSM failed the opera-
tion.
38
HP MPIO SVSP DSM event log messages
Table 6 lists the HP MPIO SVSP DSM event log messages and provides a description of each message.
Table 6 HP MPIO SVSP DSM event log messages
DescriptionMessageEvent
ID
A new multipath disk has been discovered. X represents
the serial number of the new disk. Y is the SCSI address
of the first path to this disk.
Discovered a new multipath
capable disk with serial num-
ber X; first path SCSI ad-
dress Y.
101
A new path to an existing multipath disk has been dis-
covered. X represents the serial number of the disk. Y is
the SCSI address of the new path that was found.
A new path (SCSI address Y)
was added to existing mul-
tipath capable disk X.
102
A failed path to an existing multipath disk has recovered.
X represents the serial number of the disk. Y is the SCSI
address of the path that has been recovered.
The path (SCSI address Y) to
multipath capable disk X has
recovered.
103
A previously selected path has been restored as the
preferred path for I/O operation. X represents the serial
number of the disk. Y is the SCSI address of the preferred
path that has been restored.
The preferred path (SCSI ad-
dress Y) for multipath cap-
able disk X has been re-
stored.
107
The DSM has completed processing the removal notifica-
tion for a path to a given multipath disk. X represents the
serial number of the disk. Y is the SCSI address of the
path for which the removal notification has been pro-
cessed.
The DSM has completed remove
processing for path (SCSI ad-
dress Y) to multipath capable
disk X.
108
The DSM has successfully completed the initialization
during startup. X is the version of the DSM.
The DSM (version X) has been
started successfully.
109
This message is logged when the DSM detects that a
previously failed (inoperative) multipath capable disk with
serial number X has recovered and become operational
again.
The previously failed mul-
tipath capable disk X has re-
covered.
110
This event is logged when generation of removal event
notifications (Event IDs 304, 302 and 108) for the
multipath capable disk with serial number X has been
disabled upon request in the DSM.
The removal event notifica-
tions for multipath capable
disk X have been disabled
upon request.
111
HP MPIO Full Featured DSM for SAN Virtualization Services Platform 4.01.00 installation and reference
guide 39