HP MPIO Full Featured DSM for EVA4x00/6x00/8x00 family of Disk Arrays 4.01.00 installation and reference guide (AA-RW7SP-TE, September 2010)

hpdsm devices
Y4.0.1.3Disk 3
RR— Sub-
set
9600508B400101F6A000070001DA10000HP HSV2103
Y3.0.2.4Disk 4SQR9600508B400101F6A000070001E160000HP HSV2104
N2.0.2.5Disk 5NLB9600508B400101F6A000070001E1C0000HP HSV2105
N2.0.2.6Disk 6NLB9600508B400101F6A000070001E220000HP HSV2106
N3.0.2.7Disk 7
SQST—
Subset
9600508B400101F6A000070001E280000HP HSV2107
N3.0.2.8Disk 8SQST9600508B400101F6A000070001E2E0000HP HSV2108
hpdsm devices all
Syntax: hpdsm devices all
The hpdsm devices all command displays the information of the device, followed by their path
information as shown in the following example. If there are no devices present, the following message
is displayed: No devices found.
NOTE:
See hpdsm set device policy for a definition of the policies. The P.B.T.L. column shows the device port,
bus, target, and LUN.
Example:
hpdsm devices all
Total No. of Devices:2
Device Name:HP HSV210Device#:1
Active Paths: 2Serial No:6005008B400101F6000170000
Disk 1Policy:NLB
ALB:NP.B.T.L:2.0.3.1
P.B.T.LRTPHBA Slot#State
Controller
Port#
Path#
*
3.0.2.3000100027Active
P898DX-
AAQQO101U-2
1
4.0.2.3000100026Available
P898DX-
AAQQO101U-2
2
Managing storage arrays using the HP MPIO EVA DSM with the CLI utility24