HP MPIO Full Featured DSM for EVA4x00/6x00/8x00 family of Disk Arrays 4.01.00 installation and reference guide (AA-RW7SP-TE, September 2010)

Device Name:HP HSV210Device#:2
Active Paths: 2Serial No:6005008B400101F600018000
Disk 2Policy:SQST-Subset
ALB:NP.B.T.L:3.0.2.4
P.B.T.LRTPHBA Slot#StateController Port#Path#
3.0.2.4000100027ActiveP898DXAAQQO101U-21
4.0.2.4000100026AvailableP898DXAAQQO101U-22
hpdsm paths device
Syntax: hpdsm paths device=x
The hpdsm paths device command displays information about the paths available for device x,
as shown in the following example.
NOTE:
• The P.B.T.L. column shows the device port, bus, target, and LUN.
• The RTP column shows the target port information as defined by SCSI-3 specification.
• The Controller Port# column shows the controller serial number followed by target port number.
• The HBA Slot # is displayed as "0" for iSCSI devices.
hpdsm paths device=1
P.B.T.LRTPHBA Slot#StateController Port#Path#
2.0.2.1000200084ActiveP8398DXAAQQ013-41
2.0.5.1000200074ActiveP8398DXAAQQ013-32
2.0.6.1000100014ActiveP8398DXAAQQ010-13
3.0.0.1000100014ActiveP8398DXAAQQ010-14
3.0.1.1000200074AvailableP8398DXAAQQ013-35
3.0.2.1000200084AvailableP8398DXAAQQ013-46
4.0.0.1000100013AvailableP8398DXAAQQ010-17
HP MPIO Full Featured DSM for EVA4x00/6x00/8x00 family of Disk Arrays 4.01.00 installation
and reference guide 25