QuickSpecs

System Board
System BoardSystem Board
System Board
System Board Form
System Board FormSystem Board Form
System Board Form
Factor
FactorFactor
Factor
BTX 21.2mm x 26.7mm
Processor Socket
Processor SocketProcessor Socket
Processor Socket Single LGA 1155
CPU Bus Speed
CPU Bus SpeedCPU Bus Speed
CPU Bus Speed DMI
Chipset
ChipsetChipset
Chipset Intel® PCH C206
Memory Expansion Slots
Memory Expansion SlotsMemory Expansion Slots
Memory Expansion Slots 4 DDR3 memory slots
Memory Type Supported
Memory Type SupportedMemory Type Supported
Memory Type Supported DDR3, UDIMM (Unbuffered), ECC & non-ECC
Memory Modes
Memory ModesMemory Modes
Memory Modes Non-Interleaved for single channel. Interleaved when both channels are populated.
Memory Speed Supported
Memory Speed SupportedMemory Speed Supported
Memory Speed Supported 1333MHz DDR3
Memory Protection
Memory ProtectionMemory Protection
Memory Protection ECC available on data, parity on address and command
Memory
MemoryMemory
Memory
Maximum Memory
Maximum MemoryMaximum Memory
Maximum Memory 16GB
MEMORY LOADING CONFIGURATIONS
MEMORY LOADING CONFIGURATIONSMEMORY LOADING CONFIGURATIONS
MEMORY LOADING CONFIGURATIONS
Memory Configuration
Memory ConfigurationMemory Configuration
Memory Configuration
(Supported)
1GB, 2GB and 4GB ECC and non-ECC unbuffered DIMMs are supported, but not if mixed.
PCI Express Connectors
PCI Express ConnectorsPCI Express Connectors
PCI Express Connectors 1 PCI Express Gen2 x16 LP slot (x16 electrical/x16 mechanical)
1 PCI Express Gen2 x16 LP slot (x4 electrical/x16 mechanical)
1 PCI Express Gen2 x1 LP slot (x1 electrical/x1 mechanical)
NOTE:
NOTE:NOTE:
NOTE: LP = low profile
NOTES:
NOTES:NOTES:
NOTES: In the PCIe x16 (x16 electrical/x16 mechanical) Gen 2 slot, if it is not being used for a graphics
card, only cards certified as After Market Options for this platform are supported.
PCI Connectors
PCI ConnectorsPCI Connectors
PCI Connectors (5.0V) 1 PCI LP slot
Supported Drive
Supported DriveSupported Drive
Supported Drive
Interfaces
InterfacesInterfaces
Interfaces
SATA
SATASATA
SATA Integrated (4) Serial ATA interfaces (2x 6Gb/s SATA in blue, 2x 3Gb/s SATA
in black). One port can optionally be used for eSATA.
NOTE:
NOTE:NOTE:
NOTE: the Z210 SFF supports a maximum of two SATA/SSD drives only.
RAID 0 and 1 supported. (Factory integrated RAID is Microsoft Windows
only).
Serial Attached SCSI
Serial Attached SCSISerial Attached SCSI
Serial Attached SCSI None
QuickSpecs
HP Z210 SFF Workstation
HP Z210 SFF WorkstationHP Z210 SFF Workstation
HP Z210 SFF Workstation
System Technical Specifications
DA - 13873 Worldwide — Version 8 — July 21, 2011 Page 12