Command Reference Guide
See also
238 Platform LSF Command Reference
Optional parameters:
LSF_LIM_PORT=port_number
If the master host does not use the default LSF_LIM_PORT, you must specify the
same LSF_LIM_PORT defined in
lsf.conf on the master host.
LSF_LOCAL_RESOURCES="resource ..."
Defines the local resources for a dynamic host.
◆ For numeric resources, defined name-value pairs:
"[resourcemap value*resource_name]"
◆ For Boolean resources, the value is the resource name in the form:
"[resource resource_name]"
For example:
LSF_LOCAL_RESOURCES="[hostname hostA] [server 1] [resourcemap
1*verilog] [resource linux]"
TIP: If LSF_LOCAL_RESOURCES are already defined in a local lsf.conf on the slave host,
lsfinstall does not add resources you define in LSF_LOCAL_RESOURCES in slave.config.
lsfinstall
creates a local lsf.conf for the slave host, which sets the following
parameters:
◆ LSF_CONFDIR="/path"
◆ LSF_GET_CONF=lim
◆ LSF_LIM_PORT=port_number
◆ LSF_LOCAL_RESOURCES="resource ..."
◆ LSF_SERVER_HOSTS="host_name [host_name ...]"
◆ LSF_VERSION=7.0
-h Prints command usage and exits.
See also
lsf.conf, install.config, slave.config