Datasheet

12 Profi pack P 425 02/2020
english
4 Operating and display panel
1 Forward button
2 Stop button
3 Reverse button
4 “Ready for operation” display
5 “Fault” display
1
2
1
2
3
4
5
Optional equipment:
The HSM Profi pack 425 can also be supplied with a built-in dust collector.
Accruing dust can be removed with a dust extractor when processing the boxes. There is a
connection for the dust extractor on the right-hand side if your device has the dust collector.
If your device does not have this apparatus, you can fi t the components later when needed.
Profi Pack conversion kit: Order number x.xxx.xxx.xxx
Dust extractor: Order number 2.412.111
5 Transport, installation
WARNING
• Always transport the machine on a pallet. Lash down the machine and pallet with
strapping tape.
• Transportation (e.g. pallet truck) must be appropriately dimensioned for the machine
weight of 186 kg.
• Pay attention to the high centre of gravity of the machine during transport.
• The machine may only be placed in dry rooms, on a solid, level surface (not on carpet).
The fl oor load on each castor is approximately 62 kg.
Transport control
Check the machine for transport damage when unloading. In the event of transport damage, inform
HSM and the forwarding company immediately.