Quick Start Guide
Thank you for choosing the HUAWEI LTE E8372. The LTE E8372 provides high speed access to the wireless network. Note: This guide briefly describes the appearance of the LTE E8372 and the steps for using the LTE E8372. For details about how to set the device and Wi-Fi management parameters, see help information on the device management web page at http://huawei.setup or http://192.168.8.1.
Getting to Know Your LTE E8372 The following figure shows the LTE E8372. The actual product may look different.
USB connector Allows the LTE E8372 to connect to a computer or power adapter (not included). Wi-Fi indicator Indicates the status of a Wi-Fi network. Steady green: The Wi-Fi function is turned on. Off: The Wi-Fi function is turned off or the LTE E8372 has been removed. SMS indicator Indicates the status of the SMS inbox. To view SMS messages and manage the inbox go to http://huawei.setup or http://192.168.8.1. Steady green: There are unread messages in your inbox.
2G/3G/LT E indicator Indicates the connection status to the Mobile network (connection to the internet). Blinking green twice every 2 sec: The LTE E8372 is powered on. Blinking green once every 0.2 sec: The software of the LTE E8372 is being upgraded. Blinking green once every 2 sec: The LTE E8372 is registered with a 2G network. Steady green: The LTE E8372 is connected to a 2G network. Blinking blue once every 2 sec: The LTE E8372 is registered with a 3G network.
Getting Started 1. Remove the cover from the LTE E8372 by sliding it off. Note: Make note of the SSID and Wi-Fi network key which are printed on the LTE E8372, as shown in the following diagram.
2. Insert the SIM card and the microSD card (not included in package) into the corresponding card slot, as shown in the following figure. 3. Replace the cover and slide it into place. 2 1 1 2 Note: Ensure that the bevelled edge of the SIM card is properly aligned with that of the SIM card slot.
Do not remove the SIM card when the device is in use as it may get damaged and result in the data stored on the card becoming corrupted. Please only use compatible SIM cards to avoid damage to your LTE E8372 and SIM card. The microSD card is an optional accessory and is not included in the package. Ensure that microSD card is inserted according to the direction (as labelled on the microSD card slot).
Connection Scenarios Scenario 1: One-device Internet access using computer Scenario 2: Multi-device Internet access using Wi-Fi (connected to a computer) 8
Scenario 3: Multi-device Internet access using Wi-Fi (connected to the power adapter) 9
Using Your LTE E8372 with a computer as a USB modem (Connection scenario 1) The procedure for installing the device management software may vary depending on your computer's operating system. The following instructions are specific to Windows 7 OS. Connecting to a Netw ork 1. Connect the LTE E8372 to one of your computer's USB ports.
The drivers are installed automatically in the background. 2. When the installation is complete, the LTE E8372's device management web page (http://huawei.setup or http://192.168.8.1) is displayed and the LTE E8372 connects to the LTE network automatically. Note: If the driver installation does not run automatically, find the AutoRun.exe file in the driver path, and double-click the file to run it. The default user name and password of the device management web page are admin.
If you cannot access http://huawei.setup or http://192.168.8.1, disconnect other network connections, such as an Ethernet or Wi-Fi connection, remove and then re-insert the LTE E8372, or restart the computer. Disconnecting from a Network Before you remove the LTE E8372, make sure that the data connection has been disconnected Unplug the LTE E8372 from your computer or disconnect the LTE E8372's data connection through the device management web page at http://huawei.setup or http://192.168.8.
Using the LTE E8372 as a Wi-Fi hotspot connected to your computer (Connection scenario 2) To manage your LTE E8372’s Wi-Fi functions, login to the device management web page at http://huawei.setup or http://192.168.8.1 to configure the Wi-Fi functions. Setting Up a Wi-Fi Connection 1. Insert LTE E8372 into computer (or power adapter).. 2. Ensure that the LTE E8372's Wi-Fi function is on. The Wi-Fi indicator light should be on. 3.
wireless network adapter can be used. Otherwise, verify that your wireless network adapter is working properly. 6. Wait until a wireless network connection icon is displayed in the lower right corner of the computer screen. A wireless network connection is set up. Accessing the Internet You can access the Internet after a connection between your LTE E8372 and Wi-Fi device is set up. Note: By default, the LTE E8372 automatically disconnects from the Internet when you are roaming.
Using the LTE E8372 with a Power Adapter (Connection scenario 3) Connect the LTE E8372 to the power adapter's USB port, and connect the power adapter to a power outlet. Note: The power adapter is not included in the product package.
adapter rated 5V with a minimum output current of 750mA as marked on the power adapter. Use of a power adapter not matching the recommended specifications may cause the LTE E8372 to malfunction, fail, or could even cause a fire. Such use voids all warranties, on the product, whether expressed or implied. Please refer to the enclosed warranty card for additional information on your warranty.
Ex am ple 1: Connecting a Game Console (for ex am ple, P SP ) through Wi-Fi 1. 2. 3. 4. 5. 6. On the PSP, turn on the WLAN. Choose Settings > Network Settings. Select Infrastructure Mode. Select New Connection, and enter the connection name. Select Scan to search for wireless networks. A list of access points will be displayed on the screen. Select the access point with the LTE E8372's SSID, and press the ► button on the PSP. Confirm the SSID, and enter the correct wireless network encryption key.
7. 8. 9. Press the ► button to proceed to the next step, and then press the X button to save settings. Select Test Connection to test whether the network connection is successful. You can now open the browser and access the network.
Ex am ple 2: Connecting a Tablet Computer (for ex am ple, iPad) through Wi-Fi 1. 2. 3. 4. Touch Settings > WLAN to turn on WLAN. The tablet computer automatically searches for wireless connections and displays a list of access points. Select the access point with the LTE E8372's SSID. If required, enter the correct wireless network encryption key, and tap Join. (The lock icon indicates that the encryption key is required to connect to this wireless network.
Note: Any Wi-Fi enabled device can access the Internet through the LTE E8372. For specific operations, refer to the Wi-Fi device's user manual. Viewing Service Inform ation Visit at http://huawei.setup or http://192.168.8.1 to view your wireless network service information. R estoring Factory Defaults If you wish to restore factory settings on your device, you can do so by connecting the LTE E8372 to a computer or a power outlet, and press and hold the RESET button for 2 seconds.
RESET RE SE T Note: Restoring factory defaults deletes all the device's user-defined settings and restores all the settings on the web management page to their defaults. LTE is a trademark of ETSI.