Quick Start Manual

3
 During lightning storms, stop using the external antenna and disconnect it from the USB
Stick.
To connect the external antenna to your USB Stick, do as follows:
1. Power off the USB Stick.
2. Push the cover of the antenna interface and then connect the external antenna to the
interface.
3. Put the external antenna in an open space without any surrounding obstacles, to
ensure good reception of network signals.
Installation Guide
The procedure for installing the management program depends on the OS installed on your
PC. The following section takes Windows XP as an example.
Connecting the USB Stick to the PC
Note:
During lightning storms, power off the USB Stick and disconnect it from the computer.
It is recommended to power on the PC before connect the USB Stick to the PC, do as
follows:
1. Power on the PC.
2. Connect the USB Stick to the PC, as shown in the following figure.