Cut Sheet

Page 1 of 2

3940 Dr. Martin Luther King Drive

St. Louis, MO 63113

P/N KIL00921430 FORM NO. K1430 01/14 ERO-0-001-14

INSTALLATION, OPERATION &

MAINTENANCE DATA SHEET

DURALOY 7 SERIES

CAUTION:

Before installing, make sure you are compliant with area classications, failure to do so may result in bodily injury,

death and property damage. Do not attempt installation until you are familiar with the following procedures. All

installation must comply with the applicable Electrical Code.

Make sure that the circuit is de-energized before starting installation or maintenance.

Verify that the installation is grounded. Failure to ground will create electrical shock hazards, which can cause

serious injury and or death.

IMPORTANT:

Please read these instructions carefully before installing or maintaining this equipment. Good electrical practices

should be followed at all times and this data should be used as a guide only.

Technical information, advice and recommendations contained in these documents is based upon information

that Killark believes to be reliable. All the information and advice contained in these documents is intended for

use only by persons having been trained and possessing the requisite skill and know-how and to be used by

such persons only at their own discretion and risk. The nature of these instructions is informative only and does

not cover all of the details, variations or combinations in which this equipment may be used, its storage, delivery,

installation, check out, safe operation and maintenance. Since conditions of use of the product are outside of the

care, custody and control of Killark, the purchaser should determine the suitability of the product for his intended

use, and assumes all risk and liability whatsoever in connection therewith.

PAGE 1
INSTALLATION, OPERATION & MAINTENANCE DATA SHEET DURALOY 7 SERIES CAUTION: DURALOY 7 SERIES Before installing, make sure you are compliant with area classifications, failure to do so may result in bodily injury, death and property damage. Do not attempt installation until you are familiar with the following procedures. All installation must comply with the applicable Electrical Code. Make sure that the circuit is de-energized before starting installation or maintenance.
PAGE 2
Before installing, be sure to read and be familiar with the following instruction procedures. All installations must comply with applicable local, National Electrical Codes and/or Canadian Electrical Code. The Duraloy 7 Series consists of 10 separate models, either Aluminum or Iron type. The function of the conduit body is to provide access to conductors for pulling, splicing and maintenance per NEC regulation standards.