Cut Sheet

KILLARK RECEPTACLES
H
A
Z
L
O
C
H
A
Z
L
O
C
WWW.HUBBELL-KILLARK.COM
PR18
ACCEPTOR
®
SERIES
UGRC CONNECTORS
FEATURES-SPECIFICATIONS
Connector with Breech-Lock Cap
“3rd Hand” Plug Operation
Class I, Div. 1 & 2, Groups B, C, Dj
Class I, Zones 1 & 2, Groups IIB+H
2
, IIAj
Class II, Div. 1 & 2, Groups F, Gk
Class III
NEMA 3, 4X*
UGRC Connector
Breech cap model shown, Flip cap model
dimensions are similar
CONNECTORS
The ACCEPTOR
®
UGRC Connector
complements UGP/UGR Plugs and
Receptacles, as well as Ground Fault
Protected UGFI and UGRGF Models.
Used with Acceptor plugs, connectors can
extend the reach for hazardous location
rated portable equipment such as hand
lamps. Connectors eliminate the need
for user-created corded box mounted
receptacles. UGRC Connectors are
interchangeable and classified for use with
other NEMA bladed type explosion-proof and
dust ignition proof plugs, including Crouse-
Hinds
®
Ark-Gard
®
2 and Appleton
®
ULine
®
.
Features
• Available with the exclusive Breech-Lock
Cap (see PR5 for more info) – patented
notch provides “3rd hand” plug operation
(holds lid open while one hand operates
plug, and other holds connector).
• Factory Sealed Construction
• Copper-free aluminum (less than 4/10 of
1%) alloy resists corrosion
• Electrostatically applied and baked
powder epoxy/polyester finish
• Dead Front Construction with integral
switch – requires Hazardous Rated
NEMA Bladed plug for operation
Industrial Applications
• Petroleum Refineries
• Chemical/Petrochemical Plants
• Oil Rigs & Platforms
• Wet/Corrosive Environments
• Grain Elevators
Dimensions
k
Connector shown with Acceptor UGRP
receptacle mounted in explosion proof
Quantum
®
enclosure
8.25
2.88
3.69
Flip Cap
Certified File No. LR14667
UGP Plug
Certified File No. LR14667
j
Ark-Gard® is a registered trademark of Crouse-Hinds®
U-Line® is a registered trademark of Appleton Electric
Company®
NEMA CONFIGURATION 125V CONNECTOR CAP STYLE CATALOG NUMBER**** WEATHER RATING
5-20R with T-slots
20 Amp
125 Volt
2 POLE
3 WIRE
Breech-Lock with Notch
Flip Type
UGRC-20231BQW
UGRC-20231FQW
N4X*
N3**
Killark 125V Plugs
20 Amp
15 Amp
UGP-20231QW
UGP-15231QW
250V CONNECTOR CAP STYLE
6-20R with T-slots
20 Amp
250 Volt
2 POLE
3 WIRE
Breech-Lock with Notch
Flip Type
UGRC-20232BQW
UGRC-20232FQW
N4X*
N3**
Killark 250V Plugs
20 Amp
15 Amp
UGP-20232QW
UGP-15232QW
* Breech cap models N4X with lid closed and turned, N3 When Plug inserted Hinge Up (see page PR3)
** Flip Lid models N3 with hinge in UP position with or without plug
*** See PR15 for Plug NEMA Diagram and Dimensions
**** For Old Style plug remove QW from Catalog Number
Replacement Cap and Hinge Kits: Breech KIT-173B, Flip KIT-173
j CSA certied Class I Div.I for Canada and/or other jurisdictions accepting CSA.
k
C
CSA
US
Class II, Groups F & G for US and Canada.
l U.S. and Canadian Codes allow “T” combination slot receptacles to be used with 15A or 20A plugs. Check
breaker and wire feed size for proper application ratings.
Wire Size
Suitable for 14-10 guage SOOW or similar cable