Product Manual

ManualsBrandsHudson ManualsHandheld SprayersBugwiser Galvanized Portable Sprayer — 3-Gallon Capacity, 40 PSI

This sprayer operates with liquid under pressure. Failure to observe CAUTIONS and follow instructions for use and maintenance can cause tank, hose or other parts to become

corroded, weakened, and/or burst. This can result in SERIOUS INJURY or PROPERTY DAMAGE from forcible ejection of parts or high-pressure discharge of spray material.

DO NOT USE ANY FLAMMABLES IN THIS SPRAYER as it is not designed nor intended for such use. Some spray materials can ignite or explode. Do not spray in an enclosed

space, near an open flame such as found in a BBQ grill or water heater, near an electric motor or open switch, or any source of heat.

DO NOT SMOKE while spraying. Use of flammables could result in SERIOUS INJURY or PROPERTY DAMAGE from unintended ignition or explosion.

DO NOT USE ANY CAUSTICS OR ACIDS IN THIS SPRAYER, since these can damage or weaken the spray and its parts, resulting in SERIOUS INJURY or PROPERTY DAMAGE.

• Before using any pesticides or any other spray material in your sprayer, READ THE LABEL ON THE SPRAY MATERIAL CONTAINER AND FOLLOW EXACTLY ITS INSTRUCTIONS

FOR MIXING AND USE INCLUDING THE NEED FOR PROTECTIVE CLOTHING. Some spray materials are dangerous and should not be used in this sprayer as they can damage

the sprayer or its parts, or may be harmful to the user. This could result in SEROUS BODILY INJURY or PROPERTY DAMAGE.

• BEFORE USING YOUR SPRAYER, thoroughly INSPECT both inside and outside of the sprayer. Be sure the hose is securely attached to the tank and on/off valve, and that the

spray wand and nozzle are attached and not damaged. A loosely connected hose, on/off valve, spray wand or nozzle can come off when sprayer is under pressure and cause

SERIOUS INJURY or PROPERTY DAMAGE.

• DO NOT PRESSURIZE sprayer if tank, hose or other parts appear to be damaged, discolored, brittle, excessively soft or loose.

• DO NOT PUMP or use sprayer with head or body over pump as pressure in sprayer can forcibly eject pump if it is not properly locked in place, and this can cause SERIOUS INJURY.

• DO NOT use hot or boiling liquids in sprayer since this may weaken or damage tank, pump or hose.

• DO NOT PRESSURIZE WITH ANY MECHANICAL DEVICE such as an air compressor, since this can create dangerous pressure and bursting of parts and result in SERIOUS INJURY.

• Wear long-sleeved shirt, pants, gloves, goggles or similar protective clothing when spraying

• Do not leave residue or spray material in sprayer after use. It may damage or clog the sprayer or its parts.

• Empty, clean and drain sprayer tank and hose after each use, according to directions.

• Do not smoke or eat while mixing spray materials or spraying, and wash up afterwards.

• Use only Hudson replacement parts when servicing your sprayer. Other parts may not fit properly or may be weakened by spray materials and fail under pressure, resulting

in SERIOUS INJURY from forcible ejection of parts or unexpected high pressure discharge of spray material.

• WARNING: keep sprayer and all spray materials away from children and pets.

Before you assemble and use your sprayer, read the following Safety information. It is helpful and important!

Instruction 871-904 Metal Sprayer Instructions

DANGER!

CAUTION!

WARNING! Make sure you RELEASE ALL THE PRESSURE in the sprayer...

• Immediately after each use, even if you stop spraying for just a few minutes.

• Before removing pump, hose, spray wand or nozzle.

• Before trying to unclog nozzle, spray wand, shut-off valve or hose.

• Before servicing sprayer in any way.

• Before use when sprayer is left in the sun or other warm place for an extended period of time.

Limited One Year Warranty

H. D. Hudson Manufacturing Company warrants to the original purchaser of this product that it is free from problems in materials and

workmanship for one year from the original date of purchase. This warranty does not apply to damage to the product resulting from

accident, misuse, neglect, alteration, modification, tampering, or failure to follow instructions supplied with the product. This warranty

does not cover normal wear and tear of O-rings or seals, plunger cup and pump valve. This warranty is valid only in the United States

and Canada.

If the product or any part of it should malfunction within the warranty period, telephone our CUSTOMER SERVICE DEPARTMENT at

1-800-523-9284 for fast service. We will, at our option, repair or replace any problem parts free of charge. You must retain your sales

receipt as proof of purchase and include it with any return of product.

ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS, ARE LIMITED TO 5 YEARS. H. D.

HUDSON MANUFACTURING COMPANY EXCLUDES LIABILITY UNDER THIS WARRANTY FOR ANY AND ALL INCIDENTAL AND CONSEQUEN-

TIAL LOSS OR DAMAGES.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential

loss or damage, so limitations or exclusions may not apply to you. This warranty give you specific legal rights and you may also have

other rights, which vary from state to state.

LIMITED WARRANTY

IF YOU HAVE ANY QUESTIONS OR CONCERNS, OR ARE MISSING PARTS, DO NOT RETURN SPRAYER TO THE STORE!

PLEASE CALL OUR CONSUMER HOTLINE AT 1-800-9-SPRAYER

Visit us on the Internet: www.hdhudson.com

(1-800-977-7293)

Summary of content (5 pages)

PAGE 1
IF YOU HAVE ANY QUESTIONS OR CONCERNS, OR ARE MISSING PARTS, DO NOT RETURN SPRAYER TO THE STORE! PLEASE CALL OUR CONSUMER HOTLINE AT 1-800-9-SPRAYER Visit us on the Internet: www.hdhudson.com 1 Instruction 871-904 (1-800-977-7293) Metal Sprayer Instructions Before you assemble and use your sprayer, read the following Safety information. It is helpful and important! DANGER! This sprayer operates with liquid under pressure.
PAGE 2
Here’s How to assemble your sprayer If any part is missing, please call 1-800-9-SPRAYER (800-977-7293) to order a replacement. Check carton for: tank, pump assembly, control value assembly with hose, hose clamp, wand assembly with nozzle and instructions. In the Box Clamp Where they go Do not use any kind of lubricant on the hose or fitting. Push hose over fitting on pump. Place ¼ inch from end of hose and tighten securely.
PAGE 3
4 How to Clean and Store Important! ALWAYS RELEASE PRESSURE BEFORE OPENING OR SERVICING SPRAYER 1 2 Turn sprayer upside down. Turn nozzle away from you and squeeze the control lever until all air has escaped. Empty and add some water. 3 4 Add some dish soap. 3 4 Seal tank. Empty and drain. Shake to clean tank and spray to clean valve and wand. HUDSON EASY MAINTENANCE GUIDE- No tools required NOZZLE Clogged Clean ports and nozzle orifice with toothpick. Don’t use wire.
PAGE 4
How to Clean and Store (con’t) PUMP Won’t pressurize: Lubricate the plunger cup with petroleum jelly or replace. Plunger Pump Assembly Cylinder Wont’ pressurize or fluid enter cylinder: Clean or replace cylinder check valve. Leaks at tank opening: Clean or replace gasket in neck of funnel.
PAGE 5
4 How to Clean and Store (con’t) 1 Maintenance Parts: • Pump Complete:147-318 • Plunger Assembly: 147-255 Remove clamp at supply tube and control valve. Cut old hose off supply tube and valve stem. Slide 2 new clamps onto new hose. • Cylinder Assembly: 147-326 • Control Assembly: 149-403 2 • Wand with nozzle: 141-433 Nozzles: • Nickel-plated cone pattern: 69940 • Brass, fan pattern: 115-405 Do not use any lubricant on fitting or hose.