Installation Instructions

E-9
BASSBOOSTFUNCTION
Tapthe BBS ON/OFF BUTTON (#12) to turn on the BBS to enhance the bass effect of the
music. Tap again to turn off the BBS.
HOLDFUNCTION
To prevent accidental function changes during active use, this unit is fitted with a function
hold. After the unit has been powered on and playing in CD or FM mode,slide the HOLD
ON/OFF SWITCH (#4) to ON position.The hold indicatorwill lightontheLCDDISPLAY(#7).
Slide the HOLD ON/OFF SWITCH (#4) to OFF position toturnoffthehold function.
RESETTING THE UNIT
In case of malfunction due to electrostatic discharge, reset the unit by disconnecting the DC
plug of the AC Adapter from the DC IN JACK (#3) and remove the batteries. Wait at least
for3minutesbeforereconnectingtheDCplugtotheDCINJACK(#3)orinsertthebatteries.
INSTALLING CAR MOUNT
Attach the magnetic mount to air vent by sliding the vent claw onto a single air vent flap.
There is one metal plate installed inside the unit. Place your unit on the magnetic car mount.
CAREANDMAINTENANCE
1. Cleanyourunitwithadamp(neverwet)cloth.Solventordetergentshouldneverbeused.
2. Avoidleavingyourunitindirectsunlightorinhot,humidordustyplaces.
3. Keep your unit away from heating appliances and sources of
electrical noise such as fluorescent lampsor motors.
4. If drop-outs or interruptions occur in the music during CD play,
or if the CD fails to play at all, its bottom surface may require
cleaning. Before playing, wipe the disc from the center outwards
with a good soft cleaningcloth.