User Manual

15
8.6 Security
Select menu/settings/security, then enter the security submenu by inputting the phone
code (default phone code: 0000). You can set entry code for your Messages, Contacts,
and Recent Calls here.
Phone Lock: including phone code activation and inactivation, and password resetting, if
you activate the phone code, you have to enter the phone code every time when the cell
phone powers on.
PIN Settings: including PIN code checking and PIN code resetting. When PIN code is
activated, the PIN code need to be input when cell phone turns on. If you enter incorrect
PIN code for 3 times, you should enter PUK code to reset PIN code. PIN code and PUK
code are supplied by operator for UIM card.
Contacts Lock: setting protective code to Contacts, the default code is the same as
phone code.
Recent Calls Lock: setting protective code for Recent Calls, the default code is the same
as phone code.
Messages Lock: setting protective code for SMS service, the default code is the same as
phone code.
Call Barrings: setting the restriction of dialed calls and received calls.
Restore Factory Setting: chosen this item, the phone will be resumed to original settings
when it came out from the factory. Please be aware that after selecting the restore factory
setting, all the settings of user will be deleted.
9. Tools
9.1 Stopwatch
Press Left soft key to start time keeping, or press stop function key to pause time keeping,
or press continue function key to resume time keeping. You can press record function key
to get the time recorded.
9.2 Schedule