Warranty

*Further exclusions include failure to fully and completely follow the guidelines set forth in this
manual. Of specific note in environments where fine dust is common, such as granite, marble or
concrete plants, the compressor MUST be installed in a separate area with its own dedicated
ventilation
Warranty shall be voided under the following conditions: Failure to routinely change oil a minimum of every 6
months or and to maintain clean filtration or exceeding 70% duty cycle resulting in overheating and excessive wear
and tear. Exposing electrical components to rain or water, or installing the unit in a hostile environment such as acid
vapors or any caustic or abrasive matter that may be ingested into the pump, or installing the unit in an enclosed
area where lack or cooling ventilation if present, such as in boiler or equipment rooms where the ambient air
exceeds 100 degrees Fahrenheit. All warranties are non-transferable
*Further exclusions include failure to fully and completely follow the guidelines set forth in this manual. Of specific
note in environments where fine dust is common, such as granite, marble or concrete plants, the compressor MUST
be installed in a separate area with its own dedicated ventilation. FAILURE TO PROVIDE THIS DUST FREE
OPERATING AREA VOIDS THE WARRANTY.
Parts used for warranty purposes must be supplied by
EMAX compressor. Warranty work will be performed
by an approved Technician. If any maintenance (other than routine maintenance) is performed by a non-
approved. Technician, written pre-approval must be obtained from
EMAX compressor to prevent voiding
this warranty. Failure to fully comply with this warranty and fully comply with the manual herein will void this
warranty.
The oil purchase and maintenance program are effective as of Nov. 2019