User's Manual

humantouch.com

get ready

Remove the four screws taped to the top of the right-hand arm,

then place the arm core on top of the mounting plate. Secure the

armcoreusingthefourscrewsandtheAllenkey(provided).

ATTACH THE ARM CORE AND CAPS

1. Attach the right-hand arm core

Remove the three screws taped to the underside of the right-hand

arm cap, then place the right-hand arm cap on top of the armrest.

From the underside of the armrest, secure the arm cap using the

three screws. Repeat these steps to attach the left-hand arm cap.

2. Attach the arm caps

Slide the head sock over the headrest frame, as far as it

will go. The padded side of the head sock should face

the back of the chair.

ATTACH THE HEAD PAD

1. Slide the head sock over the headrest frame

Slide the head pad over the headrest frame, ensuring that the

frame slides into the fabric pocket located on the bottom side of

the pad. Pull the head pad down as far as it will go.

2. Slide the head pad over the headrest frame

From the front of the chair, tuck the flap on the top of the body pad

up into the head pad and smooth it flat. The flap is automatically

secured to the pad, using the hook and loop fasteners.

3. Tuck in the body pad ﬂap

Attachtheheadpillowstrapstotheheadpadstrapsusing

thehookandloopfasteners.Adjusttheheadpillowheightfor

maximum comfort.

4. Attach the head pillow