** Thank you for purchasing a HUMAX product. Please read this user’s manual carefully to be able to safely install, use and maintain the product at maximum performance. Keep this user’s manual next to your product for future reference. The information in this user’s manual is subject to change without notice.
** Warnings, Cautions and Notes Throughout the whole manual, pay special attention to the following marks that indicate hazardous situations. ** • Warning Indicates a hazardous situation which could result in serious injury. • Caution Indicates a situation which could damage the equipment or other apparatus. • Note Indicates additional information to make the user aware of possible problems and information of any importance to help understand, use, and maintain the installation.
** This product has been manufactured to comply with international safety standards. Please read the following safety precautions carefully. ** Safety Instructions and Precautions ** 1. MAINS SUPPLY 90-250V AC 50/60Hz • Operate this product only from the type of power supply indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your local power company.
10.LOCATION • Place the product indoors to avoid exposing it to lightning, rain or sun. • Do not place it near a radiator or heat register. • Make sure it has more than 10 cm clearance from any appliances susceptible to electromagnetic influences, such as a TV or a VCR. • Do not block the openings with any object, and do not place the product on a bed, sofa, rug, or other similar surface.
** Warning ** The mains plug, as a disconnection device, shall remain readily accessible by the user. ** 1. To avoid damage of the power cord or plug; • Do not modify or process the power cord or plug arbitrarily. • Do not bend or twist the power cord. • Make sure to disconnect the power cord holding the plug. • Keep heating appliances as far as possible from the power cord in order to prevent the cover vinyl from melting. • The main plug shall remain readily operable. 2.
1. Before Using the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
! ! This chapter provides detailed instructions on the product and its accessories. " Please check all package contents before using your product. ** ** Note: • Faults may occur if the remote control is left without battery for a long time. Always keep the battery inserted in the remote control. • Package contents may vary according to area. • The front and rear of the product are subject to change without notice.
! $ % ** ** 1. STANDBY LED Red light is emitted when the product is in standby mode. ** 2. STANDBY BUTTON Switches between operation and standby modes. ** 3. VOL BUTTON Display the volume bar. ** 4. CH-/CH+ or VOL-/VOL+ BUTTON Moves the TV/Radio channel or volume up/down. ** 5. TV LED Green light is emitted when the product is in TV mode. ** 6. RADIO LED Amber light is emitted when the product is in radio mode. ** 7.
! ** ** 1. STANDBY LED Red light is emitted when the product is in standby mode. ** 2. STANDBY BUTTON Switches between operation and standby modes. ** 3. VOL BUTTON Display the volume bar. ** 4. CH-/CH+ or VOL-/VOL+ BUTTON Moves the TV/Radio channel or volume up/down. ** 5. TV LED Green light is emitted when the product is in TV mode. ** 6. RADIO LED Amber light is emitted when the product is in radio mode. ** 7.
! ** ** 1. STANDBY LED Red light is emitted when the product is in standby mode. ** 2. TV LED Green light is emitted when the product is in TV mode. ** 3. RADIO LED Amber light is emitted when the product is in radio mode. ** 4. STANDBY BUTTON Switches between operation and standby modes. ** 5. VOL BUTTON Display the volume bar. ** 6. CH-/CH+ or VOL-/VOL+ BUTTON Moves the TV/Radio channel or volume up/down. ** 7.
! ** ** 1. STANDBY LED Red light is emitted when the product is in standby mode. ** 2. STANDBY BUTTON Switches between operation and standby modes. ** 3. VOL BUTTON Display the volume bar. ** 4. CH-/CH+ or VOL-/VOL+ BUTTON Moves the TV/Radio channel or volume up/down. ** 5. TV LED Green light is emitted when the product is in TV mode. ** 6. RADIO LED Amber light is emitted when the product is in radio mode. ** 7.
! ) % ** 1. LNB IN Connects a satellite antenna cable. ** 2. LNB OUT Connects another digital satellite receiver. ** 3. RS-232C Connects to the PC to update software. ** 4. AUDIO L/R Connects to the TV or VCR using an RCA cable. ** 5. VIDEO Connects to the TV or VCR using an RCA cable. ** 6. RF IN Connects to the general aerial antenna or cable. ** 7. RF OUT Connects to the RF IN of the TV using an RF cable. 8. POWER CORD Connects to the power cord.
! ) * % 1. Mute Mutes or unmutes the audio temporarily. ** ** 2. UHF Displays the UHF menu. ** ** 3. SOURCE Currently not supported. ** ** 4. NUMERIC(0-9) BUTTONS Enter a TV/radio channel number. ** ** 5. FAV Currently not supported. ** ** 6. i(Information)-RED Displays the channel and programme information. ** ** 7. SOUNDTRACK-GREEN Displays the soundtrack list. ** ** 8. GUIDE Displays TV Guide. ** ** 9.
! ** 15.STANDBY Switches between the operation and standby modes. ** ** 16.TV/RADIO Switches between TV and Radio modes. ** ** 17.WIDE Sets the display format. ** ** 18.MENU Displays the main menu. ** ** 19.ZOOM-BLUE Enlarges the picture. ** ** 20.SUBTITLE-YELLOW Displays the subtitle language list. ** ** 21.TIME-WHITE Displays the reservation box while watching a programme. Displays the time box in the guide. ** ** 22.
!+ !+ ** You can connect the product to the TV with the particular equipments for gaining optimum signal quality. The product provides various interfaces to connect to the TV, VCR or other devices. Select the most appropriate procedure depending on the equipment you have. ** 1. Connect the antenna to the LNB IN. 2. Connect the product and the TV using an RCA cable. 3. Connect the product and the TV using an RF cable. 4. Connect the power cord of the product to a wall outlet. 5.
, %% - , %% - ** When powering on your product for the first time after purchase, the installation wizard will operate automatically. . ! Select the appropriate language from the list and press the OK button to save. You can also select the language using the COLOUR buttons. /!* 0 1! You can search satellite and channels.
, %% - 2 * You can set the current time. Select Current Time/Time Offset/Daylight-Saving Time and set an option. Note: Set the current time to receive accurate TV guide information. ) !% After all setting is complete, you can view the result screen. Press the OK button to complete the installation wizard.
% . % . ** You can display the channel list and switch to other channels. Five types of channel lists are provided for quick and easy channel search. ** All (RED) The list of all TV/radio channels Favourite (GREEN) The lists of favourite channels • Auto : The list of channels classified by frequency in favourite channel list. • Smartcard : The list of channels classified by Smartcard in favourite channel list (if available).
% . *+% 31 4 % . 1. Press the OK button while viewing a programme to display the channel list. You can also display the channel list by selecting MENU>Channel List>Simple/Advanced. 2. Press the COLOUR button to display the corresponding channel list. 5+ % . 1. Press the MENU button while the channel list is displayed. 2. Press the EXIT button to save the changes.
26 ! 26 ! 6 7 26 ! You can view the detailed programme information of each channel in time and date order. Press the GUIDE button or press the MENU button and select TV Guide. Press the EXIT button to exit the TV guide screen. ** ** 1. Channel & programme information 5. Group name 2. Video preview window and channel number 6. Icon 3. Indication of present time 7. Table date & time range 4. Present date and time ** Displayed only when there is any information of programme.
26 ! 26 ! ** You can also customise your own programme guide to list the channels or programmes of interest to you and schedule your viewing using the programme information. ** Style Each time you press the RED button, the style of TV guide changes in main, weekly, quick mode order. Find Press the GREEN button to find a programme. You can select Keyword and Genre using the button Schedule Press the YELLOW button to display the list of the reserved programme.
% % % % ** You can set rating limits for each programme according to the age of the viewer or change your previous PIN-Code. ** 1. Press the MENU button. 2. Select Parental Control and press the OK button. You will be prompted to enter your PIN-Code. Enter the PIN-Code using the NUMERIC(0-9) buttons. ** Tip: • The default PIN-Code is 0000. • The default PIN-Code is 1234.
# , %% # , %% ** You can configure the installation setting and perform channel search. Tip: • The default PIN-Code is 0000. • The default PIN-Code is 8272. (IR-ACE II UBI only) • If you have forgotten your PIN-Code, please contact your local product distributor. # * ** 1. Press the MENU button. 2. Select Installation and press the OK button. 3. Select System Setting and press the OK button. OSD Language can set the default language for menu, audio, and subtitle.
# , %% # 5 % 1. Press the MENU button. 2. Select Installation and press the OK button. 3. Select Organising Channels and press the OK button. Organising TV/Radio Channels>Organising All Channels You can delete, move, lock, skip or rename the channels you have chosen. ** Delete Press the RED button to select the channel you want to delete. Move Press the GREEN button to select the channel you want to move.
# , %% ** # % 1. Press the MENU button. 2. Select Installation and press the OK button. 3. Select Channel Search and press the OK button. Humax Auto Search You can automatically search satellites and channels without entering any other information. Refer to the 3.2 Humax Auto Search. ** Antenna Setting You can set antenna and LNB information to search services.
# , %% # ! ** 1. Press the MENU button. 2. Select Installation and press the OK button. 3. Select Status and press the OK button. STB Status You can confirm the information of the STB. ** Signal Detection You can display the percentage of signal strength and quality. ** Humax SW Update You can update software automatically or manually. When completing the software update, the product is automatically powered off and again.
& 7 + & 7 + In order to maintain proper performance of the product, it is essential to have the most up-to-date software. Visit the Humax website to check the latest news and newly released software versions. – http://www.humaxdigital.com. It is recommended that you periodically check for the availability of software update. & 521 954 1 : OTA, an abbreviation of Over–the-Air, is a standard for the transmission of software through a broadcast system.
& 7 + & 7 + * You can connect your product to the PC directly and update your software by transferring the new software from the PC. Follow these steps to download new software from PC to this product. ** 1. Download the new software file equivalent for this product model from the Humax website (http://www.humaxdigital.com). 2. Download and install the download tool. 3. Connect your PC to this product with an RS-232C serial cable. 4.
' 1++ 0 ' 1++ 0 ' 2 !;% Before contacting your local service centre, please read the tips below carefully. If the problem persists after completing the following procedure, please contact your local product distributor or service centre for further instructions. 1. No message displayed on the front panel. (The product will not switch on.) • Check the main power cable and make sure it is plugged into a suitable power outlet. • Check that the mains supply is switched on.
' 1++ 0 4. No or poor sound • Check that your AV cable is connected correctly. • Check the volume levels of your TV set and the product. • Check if the product or TV is on mute. • Check audio type or soundtrack option in the AV menu. 5. Remote control does not operate. • To control the product, the top end of the remote control should point directly towards the receiving part of the product. • Remove and reinsert the batteries in the remote control.
' 1++ 0 ' < = Error message No or bad signal Possible causes What to do The satellite dish is not pointing at Adjust dish alignment. the satellite. Signal is too weak. Increase the LNB voltage or connect a signal amplifier. Satellite dish is too small. Change to a larger dish. Problem with LNB. Change the LNB. Wrong antenna setting. Set the antenna correctly. The channel is The channel has a signal, but no scrambled or not audio or video is provided. available.
' 1++ 0 ' + Tuner & Channel Input Connector IEC 169-24 female (F-Type) Frequency Range 950MHz to 2150MHz Signal Level -25 to -75 dBmV LNB Power & Polarization Vertical: 13.5V Horizontal: 18V Current: Max. 500mA, Overload Protection 22kHz Tone Frequency: 22±4kHz Amplitude: 0.6±0.2V DiSEqC Control Version 1.0/1.2/2.
' 1++ 0 A/V & Data In/Out Video 1 Output RCA (CVBS) Audio 2 Output RCA (Audio L/R) RS-232C 9 pin Socket type Power Supply Input Voltage 90~250V AC, 50/60Hz Type SMPS Power Consumption Operation - Max. 30W Standby – Max. 9W Protection Separate internal fuse & Lightning protection Physical Specifications Size 260 x 50 x 182 mm Weight (Net) 1.
' 1++ 0 ' 4 !++ Information concerning troubleshooting, software upgrade and product support is provided in the following websites and call centers. Should your product require warranty service, please contact HUMAX to obtain the appropriate authorization. / =1> %% * Tel: 01805-778870 (€0,14/min) Opening Hours: Mo-Fr 8:00-23:00 Uhr, Sa-So 8:00-20:00 Uhr E-mail: support@humax-digital.de Website: www.humax-digital.
( 1++ 0 1! % Tel: 1800 613 011 Opening Hours: Mon- Fri 9:00-17:30 E-mail: techinfoau@humaxdigital.com Website: www.humaxdigital.