Operations Manual

48
Select Views
(Advanced)
SelectViews sets theavailableviewstoeitherhidden
or visible in the view rotation. The view will be
removed from the view rotation if it is set to Hidden
and will be displayed intheview rotation ifit is set to
Visible. The following views are available:
• SonarView
• SonarZoom View
•SplitSonarView
• Big DigitsView
• Circular Flasher
• Self Test
• AccessoryTest
The display status of these views can be changed only when in Advanced User Mode
(see Setup Menu Tab: User Mode.)
To Select Views:
1. Make sure you are in Advanced User Mode, then highlight Select Views on
the Setup menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate this procedure.
3. The Select Views submenu will appear, showing a list of all Views that can
be hidden or made visible. Use the UP or DOWN Cursor keys to select a
particular view, then use the RIGHT or LEFT Cursor keys to change the View
status from Visible to Hidden or vice versa.
Select Views