Installation Instructions

1886

Ceiling Bracket Hanging Fan Wiring Motor Housing Blades Light

Installing the Bulbs and Glass

Installing the Blades:

x15

Insert grommets found in the hardware bag into the

holes in the blades, then secure each blade to a blade arm

with screws found in the hardware bag.

Repeat x5

bag

x10

Lightly attach the blade arms to the

motor with the blade arm screws,

then securely tighten after both

screws are attached.

Repeat x5

Blade Screw

Grommet

Blade Arm Screw

Fan style may vary.

Note:

Assembling the Light

Installing the Motor Housing

STEP

Raise the motor housing up over the motor and ceiling

bracket. Turn the motor housing so the screw holes align

and the indentation in the housing locks into place with

the notch in the ceiling bracket. The motor housing is

not secured until the next step is complete. Do not

leave unattended.

With a Phillips head screwdriver, install

the four motor housing screws found in

the hardware bag. Tighten all four

screws securely.

bag

Notch

Indentation

Motor Housing

Screw

bag