Installation Instructions

10
1886
Install the three cage assembly
screws and tighten all three
screws securely.
Cage
Assembly Screw
3 of 3
Cage Assembly
Screw
BAG
IMPORTANT
Make sure the cage assembly is securely
attached to the light kit assembly. Failure to
properly secure all three assembly screws
could result in the light kit falling.
Installing the Glass and Light Fixture Cage
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Bulbs/Cage Remote Cradle
Notch
Tab
Position the notches in the outer rim of the globe so they
line up with the tabs on the light kit assembly. Carefully
lift the globe up inside the light kit assembly as far as it
will go. Rotate the globe in a clockwise direction until it is
held tightly in place by the three tabs.
Lift the cage assembly into place
Fan style may vary.
Note:
Fan style may vary.
Note:
WARNING
GLASS FALL HAZARD
To prevent SERIOUS INJURY or DEATH, make
sure that glass is properly secured.