High Performance Oscillating Fan Owner’s Guide Models 90400 90406 44826-01 20091012 ©2009 Hunter Fan Co.
Important Safety Information Read & Save These Instructions 9. Close supervision is necessary when any appliance is used by or near children. WARNING To reduce the risk of fire or electrical shock, DO NOT use this fan with any solid-state speed control device. 10. NEVER insert fingers, pencils or any other objects through the grill when the fan is running. 11. DO NOT operate any appliance with a damaged cord or plug, after the appliance malfunctions or has been dropped or damaged in any manner.
WELCOME Unpacking Thank you for choosing the Hunter Millennium™ Table Fan. This manual gives you complete instructions for using your fan. Here are some the features you will enjoy with your fan: As you unpack the fan, save the carton and packing materials in case you want to move or ship the unit in the future. •An attractive design that enhances any decor NOTE: It is best to have someone hold the box while you lift the fan and the protective packaging out of the carton.
Grounding Instructions LINE CORD SAFETY TIPS This appliance is for household use only and may be plugged into any 120-volt AC electrical outlet (ordinary household current). DO NOT use any other type of outlet. 1. NEVER pull or yank on the cord or the appliance. 2. To insert plug, grasp it firmly and guide it into the outlet. 3. To disconnect the appliance, grasp the plug and remove it from the outlet. WARNING This unit is suitable for grounded receptacle use only. 4.
Operation 4. To select the speed, turn the Power/Speed Control knob from OFF to the desired speed setting: O (off), I (low), II (medium), III (High). This appliance is for household use only. 1. Place the fan on a dry, safe, flat surface where it cannot fall or be pulled by the cord. 5. To control the upward and downward direction of airflow, loosen the screw on the side of the fan housing neck. Adjust to the desired angle and tighten the screw. 2.
Maintenance This fan is permanently lubricated and will not require additional lubrication (oil) for the life of the fan. 4.Grills and blades may be cleaned with mild soap and water. This fan requires little maintenance and contains no user serviceable parts. DO NOT try to fix it yourself. Contact qualified service personnel if servicing is needed. 6.DO NOT allow water or any other liquid to get into the motor housing or base. 5.Use a soft, slightly damp cloth to wipe the remaining fan parts. 7.
Storage Tr Troubleshooting 1. Disassemble and clean fan before storing. PROBLEM 2. Keep the original packaging for the purpose of storing the fan. SOLUTION •Fan will not oscillate. •Push down on knob on top of motor housing to activate oscillation. 3. ALWAYS store the fan in a dry place. 4. NEVER store the fan while it is still plugged in. PROBLEM •Can not adjust the angle of the fan. 5. NEVER wrap the cord tightly around the fan. SOLUTION 6.
44826-01 20091012 ©2009 Hunter Fan Co.