Full Product Manual

INSTALLATION

MOTOR ASSEMBLY

NOTE

Be sure not to pinch the

motor cable when raising the

downrod into place.

Raise motor, using a lift, up to

downrod while pushing cables into

downrod.

Feed the press studs through

downrod ange and secure with

nylon lock nuts. (Pull excess wire

and cable through top of downrod.)

Insert retention link into fork and

align holes.

Insert clevis pin into retention rod

and secure with provided clip to

connect Retention Cable to the

motor.

To connect the VFD cable to the

fan motor, Join the two connectors

and twist, making sure they lock

together

NEVER LIFT BY MOTOR CABLE

CRUSH HAZARD. To prevent serious injury or death, ALWAYS attach

the Retention Cable to the fan motor and secure to the building

structure on EVERY fan.

NOTICE