Full Product Manual

Electric Shock Hazard.

To prevent serious injury or death:

• BEFORE installing or servicing your fan, ALWAYS disconnect the power by turning

off the circuit breaker or breakers to the fan locations and conﬁrm Lockout/

Tagout procedures are in place.

• If you cannot lock the circuit breakers in the off position, securely fasten a

prominent warning device, such as a tag, to the electrical panel.

• All wiring must be in accordance with national and local electrical codes, in-

cluding ANSI/NFPA 70. If you are unfamiliar with wiring or in doubt, consult a

qualiﬁed electrician.

• The electrical receptacle for the panel should be installed prior to panel instal-

lation. For a chart of receptacles, refer to page 15.

• Do not use extension cord with fan.

• Do not remove covers while power is on.

• Do not use improper voltage source.

INSTALLATION

CONTROL PANEL

Electric Shock Hazard