Full Product Manual

INSTALLATION
CONTROL PANEL
4
NOTE
Twist Lock will act
as a disconnect.
TIP
For detailed
E-Stop (Fire Relay)
wiring, see Page 23
B
C
D
CAUTION: DO NOT CONNECT POWER UNTIL
MECHANICAL INSTALLATION IS COMPLETE.
A
The control panel should be
mounted ve feet outside of
the swept area of the fan.
C
Connect VFD cable from
fan to the Industrial Control
Panel. Twist to lock in place.
Secure excess cable to
mounting location.
D
Connect he communication
cable (Cat 5) to one of the
COMM terminals and run
cable down to the control
location.
B
Position the control panel with
plug connectors facing down.
If using uni-strut attached to
the building structure, secure
Industrial Control Panel with
four 1/4-20 fasteners, one in
each conrner of the panel.
16