Manualshelf

Full Product Manual

ManualsBrandsHunter Industrial ManualsCeiling FansXP 14 ft. 110-Volt Single Phase HVLS Indoor Anodized Black Ceiling Fan with Wall Control
11121314151617181920
INSTALLATION
BLADES
7
18
A
C
NOTE
The blade is marked with a number to signify
which size fan it goes with.
B
A
To install blade, insert the
press studs through the
holes in the blade holder.
Remember to install with
the numbers facing up.
B
Start the nylon lock nuts
onto the press studs to
hold in place.
C
Tighten the nylon
locknuts on the the press
studs using the 19mm
wrench or socket.
D
Repeat steps A-C
for each of the three
remaining blades.
ALWAYS conrm the number on each fan blade post matches the number on the motor plate. This will
ensure properly sized fan blades are installed to each motor and prevent damage to the fan.
NOTICE
To reduce the risk of personal injury, do not bend the blades or blade posts when installing the fan.