Installation Guide

ManualsBrandsHunter ManualsCeiling FansPort Haven LED 44-in Matte Black LED Indoor/Outdoor Ceiling Fan (4-Blade)

1886

Ceiling Bracket Top housing Hanging Fan Wiring Canopy Blades Light Glass/Bulbs

Installing the Blades

We know wiring is hard. Let’s make it easier.

You are going to need these:

4 Wire Nuts (these are in the bag)

Follow these steps to get your fan wired quickly and safely. Follow the route below that best matches your wall switch

setup. If you are unfamiliar with wiring or uncomfortable doing it yourself, please contact a qualied electrician.

Wiring the Fan

Have a single switch?

Follow these steps:

Have dual switches?

Follow these steps:

Have extra wiring?

Turn the wires upward and push them carefully back through

the hanger bracket into the outlet box. Make sure that the

wires are still attached to the wire nuts.

Hunter Pro Tip:

Here is how to connect the wires:

Push the bare metal ends of the wires together and slide a wire

nut over them. Then, twist the wire nut clockwise until tight.

Give it a gentle pull to make sure none of the wires are loose.

Connect the white

(grounded) wire

from the ceiling

to the white wire

from the fan.

Connect the white

(grounded) wire

from the ceiling

to the white wire

from the fan.

Connect the second ungrounded

(light) wire from the ceiling to

the blue wire from the fan.

Connect the grounding

wires (green, green/

yellow stripe, or bare

copper) coming from the

ceiling and ceiling plate.

Connect the black

(ungrounded) wire from

the ceiling to the black

wire from the fan.

Blue

Black

Green/Yellow Stripe

White

Ungrounded

Ungrounded (light)

Grounded

Grounding

bag

Wire Nut

Connect the black wire

(ungrounded) from the

ceiling to the black and the

blue wires from the fan.

WARNING

All wiring must be in accordance with

national and local electrical codes ANSI/NFPA

70. If you are unfamiliar with wiring or in

doubt, consult a qualied electrician.