Specification

3 TON SUPER LOW SUPER HIGH

GARAGE JACK

Tool Set Up

ATTACHING THE HANDLE

1. Fasten the Upper handle to the Lower Handle.

2. Loosen the Set Screw and insert the assembled Handle into the Handle Socket.

3. Tighten the Set Screw.

SPECIFICATIONS

Model Jack Dimensions

Max Load

Capacity

Lifting Range Saddle Dimensions

Jack

Weight

3 Ton Super Low

Super High Garage

Jack

34.06 in. x 14.37 in. x 6.30 in.

6,000

lbs

3.25 to 24

in.

4.25 in. Diameter

100.2

lbs.

PAGE 1
3 TON SUPER LOW SUPER HIGH GARAGE JACK SPECIFICATIONS Model Jack Dimensions Max Load Capacity Lifting Range Saddle Dimensions Jack Weight 3 Ton Super Low Super High Garage Jack 34.06 in. x 14.37 in. x 6.30 in. 6,000 lbs 3.25 to 24 in. 4.25 in. Diameter 100.2 lbs. Tool Set Up ATTACHING THE HANDLE 1. Fasten the Upper handle to the Lower Handle. 2. Loosen the Set Screw and insert the assembled Handle into the Handle Socket. 3. Tighten the Set Screw. 1. 2. 3.
PAGE 2
BLEEDING 1. Loosen the Fill Screw. 2. Insert the Handle into the Handle Socket to operate the Release Valve. 3. Turn the Handle counterclockwise to open the valve. 4. Pump the Handle up and down quickly several times to purge air from the system. 5. Tighten the Fill Screw. 1. 2-3. 4. 5. ADDING OIL 1. Remove the Fill Screw. (See above for Fill Screw Location) 2. Add high grade hydraulic fluid into the Fill Screw slowly until the oil reaches the top of the oil fill hole. 3.