Specification

BLEEDING
1. Loosen the Fill Screw.
2. Insert the Handle into the Handle Socket to operate the Release Valve.
3. Turn the Handle counterclockwise to open the valve.
4. Pump the Handle up and down quickly several times to purge air from the system.
5. Tighten the Fill Screw.
ADDING OIL
1. Remove the Fill Screw. (See above for Fill Screw Location)
2. Add high grade hydraulic uid into the Fill Screw slowly until the oil reaches the top of the oil ll hole.
3. Replace the Fill Screw.
NOTE: Do not touch the handle when adding hydraulic oil.
1. 2-3. 4.
5.