Full Product Manual
7 HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Operation
1
Adjusting the light direction
□ Adjust the lamp heads (B) by loosening the twist knobs (1)
on each side of the lamp heads (B).
□ Hold the top of the lamp heads (B) and move forward or
backward to the desired position. Retighten the twist knobs
(1).
1
B
2
Turning the lamp head on
NOTE: Always turn the lamp head (A) off before you
unplug the worklight.
□ Plug the power cord into a 120V outlet.
□ Press the On/Off switch (1) on the lamp heads (B) to turn
the lamps on ( — ) and off ( O ).
1
B
Care and Cleaning
WARNING: Always make sure that the worklight is
unplugged and cooled down before attempting to clean it.
□ Clean the lamp head, lens cover, lamp stand and tripod regularly with a non-abrasive cleaner.
□ Allow the worklight to cool down completely before storing.
□ Store in a safe place, out of the reach of children.
Maintenance
If the light does not work, check the following:
□ Ensure the xture is properly plugged into the power source.
□ Ensure the switch is in the ON position.