Corp. Network Router User Manual

CONFIG MENU (continued)
5- LIGHT CONTROL
Press 5 on the Keypad to enter the Light Control
Submenu.
1-CIRCUIT #1
Press 1 or 2 on the Keypad to enter the Circuit #
Submenu.
This screen programs lighting controls on one cir-
cuit.
Use the key to toggle between
E N A B L E D /
D I S A B L E D to activate the lighting function. Press
E N T.
Using the ENT key, move down the selections.
Press CLR. Key in your selection and press ENT.
The cursor will move down to the next sensor.
NAME identifies the lights on this circuit.
ONTIME controls when the lights turn on.
OFFTIME controls when the lights turn off.
O
U T P U T controls the relay used by these
PowerLinks™ (lighting circuit breakers).
Press ESC to return to LIGHT MENU.
Press ESC again to return to CONFIG MENU.
970307 HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 (Printed in U.S.A.)
P/N 374511B
Page 21
PROTOCOL
™
Hand Held Device
CONFIG MENU
1-SET THE CLOCK
2-SENSOR SETUP
3 - P ROTOCOL SETUP
4-COMM SETUP
5-LIGHT CONTRO L
6-TEMP CONTRO L
LIGHT MENU
1-CIRCUIT #1
2-CIRCUIT #2
LIGHT CIRCUIT #1
S TAT U S – E N A B L E D
N A M E – CASE LT S
O N T I M E – 0 4 : 0 0
O F F T I M E – - 2 2 : 0 0
O U T P U T – - 0 8