Corp. Refrigerator User Manual

IGFP-R3, R3P-0608

Installation (Cont'd)

Wrapping Boards Installation Instructions

Step 1: Measure 6 inches from wrapping board end.

Step 2: Measure 10 inches from top of the case.

Note: Line up 6 inch mark with 10 inch mark.

Step 3: Use bracket center hole to align with cross mark.

Note: Use pencil/marker to mark hole pattern.

HOLE PATTERN

Step 4: Drill holes (7/32”)

Screws # 14 X 1”

Step 5: Install bracket with screws (provided)

Note: Repeat Steps 1 Thru 5 for Second Bracket Installation.