User Manual HWAM® SmartControl™ Generation 2
11
Level (No bar is yellow)
The temperature level is set to "Level ".
HWAM® SmartControl™ runs at the lowest possi-
ble combustion temperature to maintain proper
combustion for the longest period of time possi-
ble, irrespective of the room temperature.
Level - (- bars are yellow)
The temperature level is set to "Level - ". At
these levels the HWAM® SmartControl™ runs
with the purpose of reaching a temperature in
the room that remains as constant as possible,
just like a radiator thermostat. It is recommen-
ded that you set the temperature level to that
which suits you best and refrain from adjusting it
upwards or downwards. HWAM® SmartControl™
is designed so that it automatically increases
combustion, the greater the dierence between
the actual and the desired room temperature.
If there is a big dierence between actual and
desired room temperature, the restoking alarm
comes on, even though there is unburned wood
and flames.
Level ( bars are yellow)
The temperature level is set to"Level ". At this
level HWAM® SmartControl™ runs with an increa-
sed flue gas temperature and increased room
temperature. This level is intended for situations
where the stove is required to produce much
heat in a short time. It is recommended to not
run at this level for long periods of time.
NOTE: Due to the increased flue gas tempe-
rature and the desire for high room tempe-
rature, much energy is required to maintain
proper combustion. The restoking alarm may
thus be emitted earlier although there are
flames and unburned wood.
Home screen - live data
To see live data the device is rotated.
Live data in IHS SmartControl™ displays information
received from the stove relating to the ongoing
combustion.
NOTE: Live data is refreshed only as long as you are
connected to HWAM® SmartControl™ and the app
is open. Note that the screen rotation in the mobile
device’s settings menu must be activated.