User Manual HWAM® SmartControl™ Generation 2

12
2 1
Updating the HWAM® SmartControl™
IHS SmartControl™ is automatically notified when a new
update for HWAM® SmartControl™ is available.
To update your system, select "Yes"
1
.
If you do not wish to update, select "No"
2
.
Each time the app is opened, it will automatically check
to see if there is an updated version available.
NOTE: It is recommended that you always update
the system to include the last new software, as this
ensures the best functionality of the system. It is not
possible to update the stove if it is more than °C.
IHS SmartControl™ will begin updating the stove. It may
take a few minutes depending on the connection qual-
ity and the size of the update.
After the update is complete, the stove will restart and
will then be refreshed and ready for use.
NOTE: IHS SmartControl™ will lose the connection
to the system for a short period while the system
reboots.
IHS SmartControl
TM
- messages
DO NOT TURN OFF THE SYSTEM
WHILE UPDATING!
Do not turn o the power supply to the stove during
the update as it can lead to errors in the system and
cause permanent Airbox failure.