User Manual HWAM® SmartControl™ Generation 2

15
A
B
A
A
A
Settings: Wi-Fi
Here you can see to which network the HWAM®
SmartControl™ is connected. To reset this, for
example, if you want to connect to another net-
work, select "Reset Wi-Fi settings"
A
.
Settings: Update firmware
If a new update is available, this will be shown in
the menu "Update firmware". To update HWAM®
SmartControl™ to the most recent version, press
the button with "Update to V x.x.x"
A
upon
which, the update starts automatically (see pre-
vious section "Updating the HWAM® SmartCon-
trol™" for instructions to update).
NOTE: When the app is opened, the system
will display a message if there is a newer ver-
sion available.
Update complete √
Settings: Update algorithm
If a new update is available, this will be shown
in the menu “Update algo”. To update HWAM®
SmartControl™ to the most recent version, press
the button with “Update to V x.x.x”
A
upon
which, the update starts automatically (see pre-
vious section “Updating the HWAM® SmartCon-
trol™” for instructions to update).
Update complete √
Help
In the "Help" menu, the current status of the HWAM®
SmartControl™ can be seen and whether or not the
system has detected a fault.
It is also possible to send a log file from the stove to an
e-mail recipient
A
in case of combustion problems and
start a
B
self-test. This requires a mail programme on
the smartphone or tablet on which the app has been
installed.