User Manual HWAM® SmartControl™ Generation 2

16
A
A
7
Stoves
If there are more than one stove connected on the
network
A
, it is also possible to communicate with
them. The system supports  stoves on the same
network.
In the "Stoves" menu, select the stove you want to com-
municate with.
NOTE: Only stoking alarms for the selected stove will
be emitted.
The HWAM® SmartControl™ can provide a number of
alarms and warnings along with the possible causes
underlying the problem. It is also possible to see if there
are errors in the system.
To see the status of your system, select the "Help"
menu
A
This is an alarm and you should stop using your stove
until the fault is rectified. Contact your dealer if you do
not find the answer in your app.
If the system emits an "Overheating" alarm, the stove
has become too hot. HWAM® SmartControl™ will make
sure to regulate, so the stove cools down in tempera-
ture. You do not need to do anything. The system auto-
matically returns to normal operation when the flue gas
temperature goes down.
This is a warning and you can continue to use your
stove. Nevertheless, contact your dealer so the fault
can be repaired if you do not find the answer in your
app.
Alarms & Warnings
Error ID: Red
Error ID: Yellow