User Manual HWAM® SmartControl™ Generation 2

17
2
1
1
LED indicator
There is an LED indicator at the bottom of the wireless
room temperature sensor. This will indicate the following:
A
No connection to HWAM® SmartControl™
In the absence of a connection to the HWAM®
SmartControl™, the room temperature sensor will
alternately flash green and red.
B
Pairing mode
When the room temperature sensor is ready to
be paired with the HWAM® SmartStove™, it will
flash green at a fast pace.
C
Restoking
When HWAM® SmartControl™ detects that it is
time to refill with additional wood, the room tem-
perature sensor makes repetitive sounds while
flashing green at a steady pace.
D
Alarms & Warnings
When HWAM® SmartControl™ detects an alarm
or warning, the room temperature sensor makes
repetitive sounds and simultaneously flashes
red.
For further information and details about the
alarm or warning in question, use the IHS Smart-
Control™ app.
A room temperature sensor is provided as a standard with the HWAM® SmartControl™. This
is used by the system to detect the room temperature and adjust the combustion in order to
ensure an even and comfortable room temperature.
The sensor communicates with HWAM® SmartControl™ via a wireless connection. The maxi-
mum distance in clear view between the HWAM® SmartStove™ and the room temperature
sensor is  - metres. The range is shorter if there are walls in between.
The room temperature sensor is provided with a light indicator
1
at the bottom of the unit, a
button on the front of the unit
2
, and an in-built speaker.
NOTE: It is not possible to adjust the volume on the device.
Room temperature sensor